| Customization: | Available |
|---|---|
| Application: | Construction |
| Bonding Function: | High Temperature Resistant Adhesive |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
HT-500Epoxy Resin Anchoring is two-components modified epoxy resin adhesive, with high quality plastic tube, double cartridge package. It's injected into holes with dispenser gun, by mixing part A and part B evenly, to plant rebars.
Modified epoxy resin, styrene-free, safe and non-toxic
High strength, strong bonding force, good toughness, the effect is equivalent to embedded
Anti-aging, good heat resistance, no creep at room temperature
Low humidity sensitivity, long-term load stability in humid environment
Anti-acid-base, good seismic performance, no expansion
The thixotropy is good, especially suitable for the side or top surface anchorage planting bar
Double-barrel straight mixing package, with special glue gun, no need for manual dispensing
Short curing time, can cure at low temperature
Planting of steel bars and bolts in concrete' s frame member
Fixation of drying hanging brackets of curtain walls and stone materials
Reinforcement of building structures and the anchorage of framework
Basic fixation of many equipment
Anchoring connection of steel structures and concrete structures
Engineering reinforcement of railways. public roods, bridges, water conservancy facilities' reconstruction and extension. Etc
Fixation of odvertisement boards, tunnel pipe lines. elevated road noise barriers and barricades
| Mechanical Properties | |||||
| Item | Epoxy Resin Anchoring | ||||
| Appearance | Part A: White paste | ||||
| B: Red paste | |||||
| Density of Cured Adhesive(g/cm3) | 1.50±0.10 | ||||
| Ratio | A:B=3:1 | ||||
| Ambient Temperature(°C) | -5 | 0 | 10 | 20 | ≥30 |
| Time of Operate(min) | 60 | 45 | 30 | 25 | 20 |
| Cure Time(h) | 72 | 48 | 24 | 12 | 6 |
| Shelf Life(month) | 12 | ||||
| Performance Parameter | ||||
| Testing Item | Testing Conditions | Standards (GB50728-2011) | ||
| I Grade A | ||||
| Colloid Properties | Splitting Tensile Strength (MPa) | In (23±2)°C, (50±5)% RH conditions, with the addition of 2mm/min speed to test | ≥8.5 | |
| Bending Strength (MPa) | >5, no breaks in a fragmented form | |||
| Compressive Strength (MPa) | ≥60 | |||
| Bonding Ability | Standard Value of Tensile and Shear Strength of Steel to Steel (MPa) | (23±2)°C, (50±5)%RH | ≥10 | |
| Bond Strength Between Ribbed Bars and Concrete Under Restrained Drawing Conditions (MPa) | (23±2)°C, (50±5)%RH | C30 φ25 I=150 | ≥11 | |
| C60 φ25 I=125 | ≥17 | |||
| Steel to Steel Impact Stripping Length (mm) | (23±2)°C, (50±5)%RH | ≤25 | ||
| Thermal Deformation Temperature (°C) | B method using 0.45MPa bending stress | ≥65 | ||
| Nonvolatile matter Content (%) | (105±2)°C,(180±5)min | ≥99 | ||
| Performance Parameter | |||
| Testing Item | Testing Conditions | Standards (GB50728-2011) | |
| I Grade A | |||
| Conditions Resistance | Wet and Heat Ageing Resistance Ability | Under 50°C,95%RH conditions, ageing 90 days, testing at ambient temperature by steel-steel tensile shear strength | Compared with the short - term results at room - temperature, the decrease rate of shear strength: ≤12% |
| Heat Ageing Resistance | Under (80±2)°C conditions, ageing 30 days, testing as the same temperature by steel-steel tensile shear strength | Compared with the short - term results at same temperature 10min, the decrease rate of shear strength: ≤5% | |
| Freezing and Thawing Resistance Ability | Under -25°C ~35°C freezing circulating temperature, circulate 8h every time, after 50 times, testing at ambient temperature by steel-steel tensile shear strength | Compared with room temperature short - term results, the shear strength decrease rate is not greater than 5% | |
| Stress Resistance Ability | Resistance to Stress for A Long Time | Under (23±2)°C,(50±5)%RH conditions, undertake 4.0MPa shear strength continuous to 210d | Steel - steel tensile shear specimens does not destroy, and creep deformation value is less than 0.4mm |
| Fatigue Stress Resistance Ability | Under ambient temperature, as frequency5Hz, stress ratio 5:1.5, max stress 4.0MPa fatigue load testing by steel-steel tensile shear strength | After 2×107times continuous sine wave fatigue loads, specimen does not destroy | |
| The Steel Bar Diameter(mm) | Pore Size(mm) | Pore Depth(mm) | The Injecting Glue VolumeMl (2/3v) | Theoretic Number(Piece) | Piece HBR335 | Note |
| 8 | 12 | 80 | 6.03 | 64 | 15.08 | 10d |
| 8 | 12 | 120 | 9.04 | 43 | 15d | |
| 8 | 12 | 160 | 12.06 | 32 | 20d | |
| 10 | 14 | 100 | 10.26 | 38 | 23.56 | 10d |
| 10 | 14 | 150 | 15.08 | 25 | 15d | |
| 10 | 14 | 200 | 20.52 | 19 | 20d | |
| 12 | 16 | 120 | 16.09 | 24 | 33.93 | 10d |
| 12 | 16 | 180 | 24.12 | 16 | 15d | |
| 12 | 16 | 240 | 32.18 | 12 | 20d | |
| 14 | 18 | 140 | 23.73 | 16 | 46.18 | 10d |
| 14 | 18 | 210 | 35.61 | 10 | 15d | |
| 14 | 18 | 280 | 47.46 | 8 | 20d | |
| 16 | 22 | 160 | 40.52 | 11 | 60.32 | 10d |
| 16 | 22 | 240 | 60.79 | 7 | 15d | |
| 16 | 22 | 320 | 81.04 | 5 | 20d | |
| 18 | 25 | 180 | 58.87 | 8 | 76.34 | 10d |
| 18 | 25 | 270 | 88.31 | 5 | 15d | |
| 18 | 25 | 360 | 117.74 | 4 | 20d | |
| 20 | 28 | 200 | 82.06 | 5 | 94.25 | 10d |
| 20 | 28 | 300 | 123.09 | 3 | 15d | |
| 20 | 28 | 400 | 164.12 | 2 | 20d | |
| 22 | 30 | 220 | 103.62 | 4 | 114.04 | 10d |
| 22 | 30 | 330 | 155.43 | 2 | 15d | |
| 22 | 30 | 440 | 207.24 | 2 | 20d | |
| 25 | 32 | 250 | 133.97 | 2 | 147.26 | 10d |
| 25 | 32 | 375 | 200.96 | 1 | 15d | |
| 25 | 32 | 500 | 267.95 | 1 | 20d |
Welcome to Hitex Insulation, your one-stop destination for high-quality high-temperature fabrics and textiles. Our company specializes in providing a wide range of products that cater to thermal insulation, welding protection, fire-fighting, and sealing applications, among others.
We take pride in our extensive experience and expertise in the industry, ensuring that we can provide only the best solutions to our clients' needs. Our team is made up of highly skilled professionals who are committed to delivering top-notch products and services that meet the highest industry standards.
At Hitex Insulation, we understand the importance of quality, durability, and performance when it comes to high-temperature fabrics and textiles. That's why we only source materials from trusted suppliers and manufacturers, ensuring that every product that leaves our facility is of the highest quality.
We are committed to building long-lasting relationships with our clients, and we do this by providing exceptional customer service and support. Whether you have a question about a product, need help choosing the right solution for your needs, or require technical support, our team is always here to help.
Thank you for choosing Hitex Insulation, and we look forward to serving all your high-temperature fabric and textile needs.
Q1.You are a trading company or manufacturer?
We are manufacturer with more than 10 years production experience, and we have our own factory in yuyao.
Q2.Can you send me a sample? Is it free?
Yes, the samples is free, but the courier charge should be on your side.
Q3.Mode of transportation?
By sea or by air.
Q4.How about the Delivery time?
Usually around 2-3 weeks after order confirmed.
Q5.Can you product the customized goods?
Surely, we can be customized according to your demanding.
Q6.What kinds of payment you accept?
We accept T/T, D/A, L/C,D/P,O/A.
){kind=link}